This is the third installment of a three-part series where we break down the best way to automate your sales workflow with Pipedrive and Zapier.
Imagine you have just stepped out of a really important meeting. You had a valuable conversation and you feel like you're pretty close to closing the deal. There's just a couple of key follow-up actions you need to take before you can move the deal to the next stage.
You get back to your desk, eager to update your CRM right away with meeting notes and some actions you need to take. You need to customize a proposal doc and send through some related case studies before you can start final negotiations next week.
Then your phone rings...
You have already ignored a stack of critical emails to get your update done, but the call is coming from a potential client that's about to close.
They are questioning why you haven't responded to their email marked 'urgent'. Delaying any further could compromise the deal, so you have no choice but to jump on it right away.
Juggling manual sales admin workflows will keep costing you time and cash
Most of your work days are rife with interruptions and most sales pros and business owners have to contend with more tools and apps than ever before.
Multitasking almost seems like a job requirement for anyone juggling multiple prospect and customer relationships.
Don’t settle for this stress and pressure.
The more time your sales team spend multitasking, the less productive and efficient they become.
According to research from Inc., lost productivity through multitasking is costing businesses approximately $450 billion per year. Even more worrying is the time you lose in the process!
If your salesperson has to jump back and forth between tasks, it takes around 25 minutes to fully regain focus.
How much time and cash is this multitasking juggling act causing your organization on a daily basis?
How to Stop Multitasking and Focus Your Sales Time
We want to teach you how to Zap any repetitive, manual tasks out of your day!
In the second installment of our Zapier series, we covered the simple zaps you can use to cut hours of admin off your sales process.
But you should never settle for just a decent sales process.
There are always more areas to optimize, more time to save, and more admin to automate. You should be constantly searching for ways to banish repetitive manual tasks from your workload.
Simple Zaps are super useful.
But you want to take your automation one step further - literally ;)
We’ve collected some of the most advanced, game-changing Multi-Step Zaps to help you scale your sales process with rapid speed.
Turbocharge your sales process with Multi-Step Zaps
Zapier’s Multi-Step Zaps are to the salesperson what the digital camera is to the photographer.
You don’t need to be messing around with developing negatives or hanging prints in a dark room. Now you can just point and shoot. Job done instantly.
Zaps can eliminate the need to jump between tools and tasks with a single trigger.
No matter how many different apps you use, Multi-Step Zaps allow you to customize an automated workflow according to your specific needs.
Once you’ve set up a Zap, you can continue to add more Action steps onto that Zap to save yourself the hours of admin involved in switching between your CRM and all of your other tools.
Imagine a single Zap that can add a task to your project management app, notify your team on Slack, and send a personalized email to your lead - all triggered instantly when you move a deal to a new stage in your Pipedrive pipeline. This is the type of turbo-boosting step change I’m about to share to help you scale your sales process almost instantly.
Zaps to help you process data instantly
In the second article of our Working With Zapier series, we looked at ways to automate data entry from forms directly into Pipedrive. But what if you want to take this one step further?
Rae Hoffman, Co-owner of search marketing company PushFire, used a Zap to add leads captured by Gravity Forms to Pipedrive. Once Rae got a taste for automating tasks with Zaps she wanted to take it a step further.
Enter Zapier’s Multi-Step Zaps!
Rae set up a workflow that created a person, a deal, and a note in Pipedrive for every new form submission.
‘The introduction of multi-step Zaps meant that one trigger could perform an unlimited number of actions — and that changed my business automation world.’ - Rae Hoffman, Co-owner at PushFire
Previously Rae was manually entering data into Pipedrive and adding new organizations, people, and deals - all by hand.
Using a multi-step Zap, the submission of a Gravity form can create four separate, yet connected, actions. Immediately. Without anyone lifting an administrative finger.
“The combination of Zapier with Pipedrive had a huge impact on our lead management process. The obvious benefit was the time shaved off leads entering into that process — which equated to saving several days’ worth of an employee’s time per month from a data entry standpoint using the above Zap alone. But it also meant we had fewer leads falling through the cracks. Our response times became quicker because leads weren’t being buried during days with heavy email volume.” - Rae Hoffman.
Pursuing new leads
Of course, when a new lead comes your way, it’s crucial to capitalize on their interest immediately. Too many opportunities are lost when follow-up actions are delayed.
But with leads coming in hot from every direction, you can quickly find yourself overwhelmed with data.
The good news is, one Zap can allow you to pursue your new leads instantly.
You can use form submissions to trigger several follow-up actions automatically.
For example, you can add the person as a contact to your Pipedrive CRM, subscribe them to your mailing list, and get the conversation started with a personalized email. Try it out here:
Schedule appointments without the tedious back-and-forth
Getting in front of your potential customers is usually a critical step towards sealing a deal, but the process of scheduling appointments can be a massive distraction in the middle of your workday. Settling on a date and time often demands an infuriating barrage of back and forth (this sometimes takes more time than the appointments themselves).
Janna Bastow, the co-founder of product management software ProdPad, wanted to take the hard work out of scheduling demos.
"If someone sets up a meeting in a specific Calendly account, we know it's for a demo. The Zap then creates a GoToMeeting invite, a Google Calendar event, and an activity in Pipedrive to indicate that the demo was scheduled. The Zap is saving us a number of manual entry steps." - Janna Bastow, co-founder at ProdPad
You can eliminate your back-and-forth meeting communications by creating Zaps between calendar tools and Pipedrive.
"Pipedrive is our single source of truth about what's happening with our customers and leads, so we use Zapier to point data towards it to make sure it's up-to-date." - Janna Bastow
Take control of your workflow with Zapier Filters
When you’re working on an important lead, pinpointing the information you need can feel like finding the proverbial needle in a big data haystack. If you’re lucky, you’re going to have a lot of incoming leads. But you don’t want to settle for luck!
To scale successfully you need a process that minimizes the time it takes to identify the best leads. You need to know which leads are most worthy of your precious time and energy, and you need to know it fast.
Hello Zapier Filters!
How to use Zapier Filters to obliterate manual workflows
Zapier’s Filter app allows you to fine-tune your workflows and cut through the noise by isolating only the data you need.
Check if form submissions contain specific keywords.
Trigger deal alerts with the right people.
Prevent errors by checking for blanks.
Zapier Filters let you choose if and when your Zaps run. They essentially add an extra rule to your automated workflow as follows:
Workflows only continue if the conditions you pick are met.
Zaps stop immediately when the requirements of a filter are not met.
By inserting a Filter step into your Zap, you can take added control over your Zaps by telling it when to run and stopping it when conditions are not met. Conditions can use AND/OR logic so you can make your rules as complex as you want. The filters support:
Date and time
Boolean fields (two-value options like yes/no)
Does/does not exist
Say your team has several verticals to service and you need to handle incoming deals for specific industries. You want to make sure no time is wasted by assigning an incoming lead to the correct owner.
A simple filtered Zap can simplify this otherwise manual task instantly!
When you receive a new form submission, you can set a filter to check for the industry keyword. Based on that keyword, you can automatically create a new deal in Pipedrive and send a Gmail notification to the new deal owner so they can determine their plan of attack right away.
Of course, there are myriad ways to use Zapier Filters to add an extra layer of control to your Zaps.
Rae Hoffman used Filters to make sure her clients received the correct information once a deal was closed.
‘When a deal is marked as Won in Pipedrive, a single-action Zap — using filters — sends an email to the client that contains next steps as far as what we need to move forward. The filter changes what email is sent based on what service type(s) the client is signing up to receive.’ - Rae Hoffman.
You can also use filters to notify the team when a target organization expresses interest. Email newsletters are a useful channel for nurturing leadss, but it’s unlikely that every subscriber is worthy of attention. You can make a list of the companies you’re interested in and Zapier can notify you when a target company subscribes and add them to your CRM.
Keep your database squeaky clean with Zapier Search Actions
Every salesperson needs a clean, reliable database that can act as a single source of truth.
Pipedrive is designed to minimize all instances of duplicate records, but the reality is that most duplicates come down to human error. When manually entering data, it’s easy to find yourself with several records for the same contact and an array of email addresses and phone numbers.
The sure way to Zap this frustration out of your workflow?
Use Zapier’s Search Actions.
Search Actions allow you to tap into the powerful data that already exists in your apps to avoid wasting time manually searching for information. This means you can look up specific data and use it later in the same Zap.
For example, you could use a Search Action to find a contact or organization in your CRM and then send the data to another app.
Some Search Actions can also create new data and offer the option to tick a checkbox that says ‘Create this item if it doesn't exist yet?’.
This way, you can instruct the Zap to find the data, or, if it can’t find it, create it instead.
For example, if someone fills out a ‘Contact Us’ form, Zapier can check if they already exist in your CRM. If they do exist, a simple Zap can dig up the existing record and update it with the new form answers. This is an invaluable time-saver. In the case that the contact doesn’t exist, this simple Zap can create a new lead for you.
You can try this workflow here:
Here are some more supported searches to add more flexibility to your workflows:
Find Organization - Finds an organization by name.
Find Product - Finds a product by name.
Find User - Finds a user by name or email.
Find Deal - Finds a deal by name.
Find Person - Finds a person by name or email.
Boost productivity and profits with Pipedrive and Zapier
Context switching is undoubtedly one of the most damaging productivity killers. All too often salespeople are jumping from one tool to the next, moving data back and forth, chasing leads here, there, and everywhere.
If you want to save your team a huge swathe of time (and sanity) you need to find a way to cut down the task load.
Our Pipedrive and Zapier integration can eliminate the need to bounce between tasks so your team can focus on the activities that matter most - closing deals and scaling revenue growth.
Effective use of automation is becoming inextricably linked to success in sales.
If you want to scale your efforts quickly and build sustainable success, it’s time to get serious about incorporating simple automation technology to optimize your sales process.
Don’t get stuck in the day-to-day.
Start automating your admin tasks now to build that compounding time-saving investment for the future.
Zapier’s paid plan offers Multi-Step Zaps, so no matter how many different apps you use - you can customize an automated workflow to cater to your business needs.
Zapier offers a free 14-day trial so you can try out these custom Zaps before committing.
Get Started Now with Your Pipedrive Account and Our Zapier Integration
Drop by our Zapier Support Page to learn exactly how to integrate your Pipedrive account with Zapier and check out some of the most popular Zaps used by Pipedrive customers.
Try some pre-made Pipedrive integrations and learn more about how Pipedrive works with Zapier.
Check out Zapier’s help documentation for details on connecting your account and setting up your first Zap.
Log in and build a custom workflow with Pipedrive and Zapier.